100cpsi/200cpsi Honeycomb Ceramic Catalytic Converter DPF/Doc/SCR Diesel Particle Filter

• Customization: Available
• Application Fields: Chemical
• Certification: ISO
• Model NO.: BS-DPF
• Condition: New
• Noise Level: Low
• Parts: Filters
• Purpose: Gas Recovery
• Cpsi: 200/300/400
• Overall Dimension: Dia 190-330mm
• Shape: Cylinder
• Length: Customzied
• MOQ: 5 PCS
• Application: Industrial Ceramic, Catalyst Carrier, Heat Storage
• Usage: Oxygen
• Machine Size: Small
• Transport Package: Cartons + Pallet
• Specification: 250*101.6 250*152.4mm
• Trademark: BESTN
• Origin: China
• HS Code: 6909110000
• Production Capacity: 3000 PCS/Month

Product Description

Diesel Particulate Filters are used in trap systems that remove particulate matter (soot) from diesel exhaust emissions. These filters have a cellular structure with individual channels open and pligged at opposite ends. Exhaust gases enter the open end, flow through the pores of the cell walls, and exit the filter through the adjacent channel. Sool particles are too large to flow
through the pores, and they collect on the channel walls. Periodically the filter is regenerated (heated) to consume the soot and clean the filter.

 

Outside Dimension
Item		Index
Wall Thickness	100CPSI	0.46±0.04 mm
	200CPSI	0.36±0.04 mm
Outside Dimension	Outside Diameter:≤120mm	±1.0mm
	≥120mm	±1%
	Height:≤150mm	±1.0mm
	≥150mm	±1%
Hole Density (Hole number per square inch)	100CPSI	100±10
	200CPSI	200±10

Physical and Chemical Properties
Item		Unit	Index
Chemical Composition	Al2O3	%	35.4±1.5
	SiO2	%	50.9±1.5
	MgO	%	13.5±1.5
Room Temperature Compressive Strength		Mpa	≥10.0
Porosity		%	≥50
Maximum Use Temperature		°C	1400
Thermal Expansion Coefficient(800°C)		10-6/°C	≤1.5
The Average of Pore Diameter		um	10-15

Size(Diameter × length)		Cell density	Shape
mm	Inches	100/200CPSI	Rotundity
Φ118.4×152.4	Dia.4.66×6	100/200CPSI	Rotundity
Φ118.4×254	Dia.4.66×10	100/200CPSI	Rotundity
Φ127×152.4	Dia.5×6	100/200CPSI	Rotundity
Φ127×180	Dia.5×7	100/200CPSI	Rotundity
Φ127×254	Dia.5×10	100/200CPSI	Rotundity
Φ144×152.4	Dia.5.66×6	100/200CPSI	Rotundity
Φ144×203	Dia.5.66×8	100/200CPSI	Rotundity
Φ144×254	Dia.5.66×10	100/200CPSI	Rotundity
Φ144×305	Dia.5.66×12	100/200CPSI	Rotundity
Φ190×152.4	Dia.7.48×6	100/200CPSI	Rotundity
Φ190×203	Dia.7.48×8	100/200CPSI	Rotundity
Φ190×305	Dia.7.48×12	100/200CPSI	Rotundity
Φ240×240	Dia.9.45×9.45	100/200CPSI	Rotundity
Φ240×305	Dia.9.45×12	100/200CPSI	Rotundity
Φ250×305	Dia.9.84×12	100/200CPSI	Rotundity
Φ260×305	Dia.10.23×12	100/200CPSI	Rotundity
Φ267×254	Dia.10.50×10	100/200CPSI	Rotundity
Φ267×305	Dia.10.50×12	100/200CPSI	Rotundity
Φ286×267	Dia.11.26×10.50	100/200CPSI	Rotundity
Φ286×305	Dia.11.26×12	100/200CPSI	Rotundity
Φ286×355	Dia.11.26×13.97	100/200CPSI	Rotundity
Φ286×381	Dia.11.26×15	100/200CPSI	Rotundity
Φ305×305	Dia.12×12	100/200CPSI	Rotundity
Φ330×381	Dia.12.9x15	100/200CPSI	Rotundity

1.Large specific surface area: Ensure sufficient contact between exhaust gas and catalyst.
 

2.Stable water absorption performance: Ensure that the catalyst is firmly and evenly coated on the surface of the carrier, while not wasting due to excessive coating.
 

3.Warming-up performance: It is required that the temperature of the carrier can reach the active temperature of the target catalyst in a short period of time after the engine is started.
 

4.Low exhaust resistance: It is required that the carrier has minimal exhaust resistance to the engine, ensuring that it does not affect the performance of the engine.
 

5.High strength: As the working environment of the carrier is on bumpy cars, it is required that the carrier have high strength and not be damaged by external forces.
 

6.Good assembly: A component of the exhaust assembly of the carrier, only with a good appearance and size can assembly be ensured.

Performance item characteristic value Thermal performance coefficient of thermal expansion (40-800 ºC)( × 10-6/ºC)<1.0 Specific heat [J/(g.k)] 0.84 Softening temperature (ºC) 1400 Melting point (ºC) 1455 High usage temperature (ºC) 1350 Physical properties Fine pore volume (cm3/g) 0.2 Apparent porosity (%) 36 Average fine pore size (um) 4 Mechanical properties Compression failure strength A particulate filter is installed in the exhaust pipe of the engine, and the filtering materials can be ceramic honeycomb carriers, etc. The working principle is that the particulate matter is first captured by the filter, and then the particulate matter captured in the filter is oxidized and burned to complete the regeneration of the collector. After collecting a certain amount of particles, it can lead to an increase in filter back pressure, a decrease in filtration efficiency, and a deterioration in the economy and power performance of diesel engine operation. Therefore, under certain conditions, DPF is regenerated to remove particles from the DPF. The regeneration of DPF includes active regeneration and passive regeneration.

Its disadvantages are difficulty in regeneration and high regeneration frequency. The thermal oxidation temperature of carbon particles can reach 825-875K, while the exhaust temperature of diesel engines is 450-675K. So it is necessary to add an external heat source (such as electric heating, microwave heating, etc.) or choose a highly active catalyst to reduce the oxidation temperature of carbon particles, so that the filtered carbon smoke particles are oxidized and removed for regeneration. However, the regeneration process can generate high temperatures above 2000 ºC, which can easily melt the ceramic carrier or cause local overheating and burning loss.