Light Corrugated Ceramic Packing Ceramic Structured Packing for Tower

• Customization: Available
• Structure Feature: Ring Form Filler
• Material: Ceramic
• Model NO.: BS-CSP
• Usage: Chemical Industry Product
• Effect: Improve The Wear Resistance
• Source: Fiber
• Type: Packing
• Transport Package: Plastic Woen Bag, Carton Box, Wooden Box, etc
• Specification: 220*100*7.0mm
• Trademark: Bestn
• Origin: Jiangxi
• HS Code: 6909110000
• Production Capacity: 1000m3/Month

Product Description

• Corrugated sheets placed in parallel form cylindrical units
• Form of highly efficient with separating efficiency several times higher than that of loose packing
• Low-pressure drop, increased operating elasticity, minimum amplifying effect and maximum liquid treatment compared to loose tower packing
• High capacity
• New tower design may reduce diameter, while renovate old towers may increase capacity significantly
• Rectifying and absorbing some corrosive mixtures, which are definitely regulated in pressure drop and theoretic plate number

Examples of successful application:
1. Vacuum to or below 1 mbar, separation of aromatic chlorides, esters, hydrocarbons and other highly temperature sensitive material isomers.
2.  Regeneration of organic solvent  of pollution of HCl / sulfate / nitrate / three hydride  and etc.
 

Type	Surface aream2/m3	Void %	Bulk density(kg/m3)	hydraulic diameter(mm)	theoretical plates1/m	angle of inclination	Max.F factorm/s(kg/m3)	Pressure drop(mm)
700Y	700	72	650-680	5	5	45	2.3	4.8
500Y	500	75	600-650	7.5	7	45	2.1	4.6
450Y	450	75	520-550	7	4	45	1.8-2.0	4.5
400Y	400	76	500-520	8	2.8-3.2	45	2.0-2.2	3.5
350Y	350	78	480-520	10	3.0-4.0	45	2.2-2.6	2.5
250Y	250	82	420-450	11.0±0.5	2.5-2.8	45	2.6-2.8	2.5
160Y	160	86	350-380	15.0±0.5	2	45	2.8-3.0	2.8
125Y	125	87	300-350	28.0±0.5	1.7	45	3.0-3.2	3

 
 
Chemical component
 

Component	SiO2	Al2O3	Fe2O3	CaO	MgO	K2O+Na2O	TiO2	Burning loss
Content	68-75	21-25	≤0.5	≤1.0	≤1.0	≤3.9	≤0.05	≤5.0
Test method standard		QB/T2578-2002

 

Items	Index	Items	Indec
Resistance	≥99.9%	Thermal deformation temperature	1350ºC
Alkali resistance	≥90%	Water Absorption	<0.5%
Density	2.35-2.5 g/cm^3	Material compressive strength	≥130MPa
Pressure density	≥20kg/cm^2	refractoriness under load	1280ºC(0.2MPa)
Moh's hardness	≥7	operating temperature	-30-1000ºC
test method standard	HG/T3210-2002,GB/T7322-2007,GB/T4738.2-84

 
Detailed description of each type of product
 
1. 700Y,500Y
 
The filler has low resistance, high efficiency, large separation capacity, and can replace other fillers or partial plate towers under certain conditions.

Product Features:
a. Large specific surface area and large porosity;
b. The gas phase passage has a small inclination angle, regularity and pressure reduction;
c. Radial diffusion is good and gas contact is sufficient.

Applicable occasions:
500Y (X): vacuum rectification which is heat sensitive and difficult to separate, especially vacuum distillation with a pressure less than 7 KPa, atmospheric distillation.
700Y (X): separation of isotopic mixtures, isomeric mixtures.
 
2. 450Y,450X
 
It is used for precision fractionation with high requirements on the mass transfer efficiency of the tower. It is especially suitable for chemical production processes such as acetic, and styrene, and separation of high-purity fine chemical products. The adaptation conditions are roughly as follows:

Gas phase load factor, F=1.5~3(m/s)[Kg.m3]1/2Minimum liquid load, L (spray density) ≥ 2m3 / m2.h
 
3. 350Y,300Y,250Y
 
The product combines the two main properties of pressure drop and efficiency in the mass transfer process. Especially suitable for atmospheric pressure in the refining process.

Distillation and low pressure fractionation columns, such as catalytic cracking, catalytic cracking, hydrocracking, hydrorefining, coking, catalytic reforming, etc. Separation of products in light hydrocarbon processing such as MTBE, isomerization, alkylation, gas fractionation, etc. The product separation of the device is also applicable to the separation of chemical products such as ethylbenzene and styrene and the absorption tower of Mass transfer efficiency can reach 2-4 theoretical plates / m packing, pressure drop 1-5mmhg / m filler.