| Customization: | Available |
|---|---|
| Shape: | Sphere |
| Drying Method: | Static Drying |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Activated alumina has many micro-paths, so the specific surface is large.It can be used as absorbent, desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecule absorbent, according to the absorbed molecule polarization, the attachment force is strong for water, oxide, acetic acid, alkali ect.
Activated alumina defluorinates just as the anion exchange resin, but the selectivity is much strong.
The defluorination effect of the activated alumina is good. The capacity is stable. It has high strength,low abrasion, no soften in water, no expansion, no powdery no crack. It can widely used in the deep drying of cracked gas, ethylene , hydrogen-generation, air seperation, instrument air drying and treatment , alos in the absorbing pollution material, such as H2S, SO2, HF and paraffin in the waste gas, especially in the drinking water defluorination.
Features:
A white or slightly red particle, ball-shaped or roll-shaped, activated alumina is insoluble in water and organic solvent, soluble in strong acids and alkalis, odorless, tasteless and non-toxic.
Chemical composition:
| Al2O3 | SiO2 | Fe2O3 | MgO | Na2O | TiO2 |
| >99% | <0.2% | <0.1% | <0.5% | <0.05% | <0.05% |
Leach able Fe2O3 is less than 0.1%.
Molecular formular:
Al2O3. N H2O (0<n≤ 0.8)
| TYPE | AA-1 | AA-2 | AA-3 | AA-4 | AA-5 | |
| Application | Adsorbent | Fluoride Removal | Catalyst Carrier | Air Dryer | ||
| Appearance | White Beads, Insoluble in water, Innocuous | |||||
| Crystal Type | x-p | x-p | y | y | x-p | |
| Composition (%) | Al2O3 | ≥93 | ≥93 | ≥93 | ≥93 | ≥93 |
| Na2O | ≤0.3 | ≤0.3 | ≤0.5 | 0.15-3 | ≤0.3 | |
| LOI (%) | 4~7 | 4~7 | ≤8 | ≤5 | 6~8 | |
| Bulk Density (g/ml) | 0.68~0.75 | 0.70~0.75 | 0.70~0.80 | 0.70~0.80 | 0.70~0.80 | |
| Surface Area (m2/g) | ≥300 | ≥300 | 280~300 | ≥300 | ≥300 | |
| Pore Volume (ml/g) | 0.40~0.50 | 0.30~0.42 | 0.45~0.50 | 0.4 | 0.40~0.50 | |
| Static Water Absorption (RH=60%) (%) | 15~17 | 3~4Fluoride | 17~20 | 17~20 | 17~19 | |
| Active (%) | -- | -- | 56~62 | -- | -- | |
| Attrition Loss (%) | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.4 | ≤0.1 | |
| Crushing Strength (N/pc) | 2~3mm | ≥60 | ≥60 | -- | -- | ≥60 |
| 3~5mm | ≥150 | -- | ≥150 | ≥150 | ≥150 | |
| 4~6mm | ≥250 | -- | ≥250 | ≥250 | ≥250 | |
| 8~10mm | ≥350 | -- | -- | -- | ≥350 | |
AA-1 Activated Alumina for Moisture Removal in gas and liquids;
AA-2 Activated Alumina for fluoride and removal in underground water treatment;
AA-4 Activated Alumina for catalyst carrier;
AA-5 Activated Alumina for desiccant air dryer and heat exchanger;
AA-102 Activated Alumina Claus Catalyst;
AA-104 Activated Alumina for Hydrogen Chloride (HCl) Purification;
AA-109 Activated Alumina for Polyethylene & Styrene production (TBC Removal)
){kind=link}