PP HDPE CPVC PE PVDF RPP Plastic Intalox Saddle Ring has smooth curved side of the bed, an increase of contacts between fill the gap, and make it more conducive to fill in the gas and liquid layer in the flow, and spread of a pressure lower-quality and high efficiency.
Advantage:
1.Higher liquid hold-up and residence time
2.Good absorption efficiency with slow chemical reaction
3.Higher capacity and lower pressure drop
Technical specifications:
| Spec.(mm). |
D*H*T80*80(mm) |
Surface area(m2/m3) |
Free volume(%) |
Number per m3 |
Bulk density(Kg/m3) |
F Factor(m-1) |
| Dg16 |
16*8.9*1.1 |
370 |
85 |
299136 |
135.6 |
602.6 |
| Dg 25 |
25*12.5*1.4 |
228 |
90 |
81500 |
97.8 |
312.8 |
| Dg38 |
38*19*1 |
132.5 |
91 |
27200 |
57.5 |
175.8 |
| Dg 50 |
50*25*1.5 |
114.2 |
92.7 |
10740 |
54.8 |
143.1 |
| Dg76 |
76*37*3 |
90 |
92.9 |
3420 |
68.4 |
112.3 |
Application:
1. Absorption, scrubbing and stripping service
2. Pulp and paper service, such as bleach plant absorbers
3. Degassing
4. Drying tower
Physical & Chemical properties of PP HDPE CPVC PE PVDF RPP Plastic Intalox Saddle Ring :
Plastic Intalox Saddle Ring can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and polyvinyiidene fluoride (PVDF). The temperature in media ranges from 60 Degree C to 150 Degree C.
| Performance / Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
| Density (kg/m3) |
0.94-0.96 |
0.89-0.91 |
0.93-0.94 |
1.32-1.44 |
1.50-1.54 |
1.75-1.78 |
| Operation Temp.(Degree C) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
| Chemical corrosion resistance |
Good |
Good |
Good |
Good |
Good |
Good |
| Compression Strength(Mpa) |
>6.0 |
>6.5 |
>7.0 |
>6.0 |
>8.0 |
>10.0 |
The bulk density given here is based on PP material.
Audited Supplier 
){kind=link}